How do I find my Zyxel password?

How do I find my Zyxel password?

To do this, open any browser and navigate to 192.168. 1.1. The default username is admin and the default password is 1234. 2. Select the Settings/Configuration icon (two gears) on the left side of the screen.

How do I log into my Zyxel modem?

Type http://192.168.1.1 on the browsers address bar and press/hit the ENTER/RETURN key on your keyboard. This will open the routers login screen. Type in the device password on the login screen to continue the setup. The default password for the Zyxel router is 1234.

How do I find my ADSL Router username and password?

Login to the ADSL Router using http://192.168.1.1. Username and password are ‘admin’ and ‘admin’.

How do I reset my ADSL modem password?

What can I do if I forget the login username/password of my DSL modem/router?

  1. Step 1 Turn off the router.
  2. Step 2 Press and hold the reset button on the rear panel with a pin, then turn on the router.
  3. Step 3 Release the reset button and wait for the device to reboot.
  4. Note:

How do I reset my ZyXEL modem?

a needle, paper clip, toothpick), press and hold the reset button for 30 seconds until the Internet light turns red. Release the reset button. Your modem will restart automatically. Please allow up to 10 minutes for the process to complete.

How do I reset my ZyXel admin password?

From a PC

  1. Open a web browser and navigate to IP address 192.168.1.1.
  2. You’ll be presented with the login for your router.
  3. Upon initial login, you’ll be prompted to change the administrative password for your router.
  4. After applying your new administrative password, you’ll be presented with the Management WAN page.

What can I do if I forget the login username/password of my DSL modem router?

The default login username and password both are “admin”. If you or someone had changed them but you forget them now, the only way to access the modem/router is to reset the router to factory default settings. Note: If you reset the device, the device will return to factory defaults, you will lose all your settings.