What is segregation group for DG cargo?
What is segregation group for DG cargo?
These specific provisions often mention segregation groups, which are families of dangerous goods that share certain similar chemical properties. Each segregation group is now identified with an alphanumeric code, starting with the letters SGG.
How do you segregate dangerous goods?
They are recommended to be stored in separated detached buildings. Class 6.1 toxic substances shall be separated from all foods or feeds. Some explosives (unstable,1.1 and 1.2), infectious substance (class 6.2) and radioactive materials (class 7) are usually deemed incompatible with all other dangerous goods.
What is the segregation table for hazardous materials?
The idea is to prevent the risk of explosions, fires, creation of toxic gas, and the like that might occur if the materials commingle. The key to figuring out which materials can or cannot be loaded, transported, or stored together is the DOT Segregation Table for Hazardous Materials (Table).
Where can I find segregation group?
The segregation group code is indicated in column 16b of the Dangerous Goods List. However, many generic and general entries may not be assigned and will have to be self-classified by the consignor as laid out in 7.2. 5.3 and 7.2.
What is the segregation group for un1760?
group 1-acids
1.5. 11.1 to include this on the transport document after the dangerous goods description, eg “UN 1760 CORROSIVE LIQUID, N.O.S. (phosphoric acid, acetic acid) 8 III IMDG Code segregation group 1-acids”.
What are the importance of segregation and separation of cargoes?
The purpose of separation of cargoes is to prevent either: Different cargoes OR. Different parcels of the same cargo…from being over-carried (inadvertently left in the ship’s hold).
How many segregation rules for dangerous goods are there?
four segregation rules
There are four segregation rules for dangerous goods loaded in conventional way on board ships.
How are segregation requirements indicated?
to its hazard. Such segregation. requirements are indicated by code numbers in Column 10B of the § 172.101 Table. (4) Segregation is. hazardous materials of. different classes which comprise the same substance but vary only in their water content (e.g., sodium sulphide in Division 4.2 or Class 8). (5) Whenever.
What does the O mean on the segregation Table?
O. Non-Toxic, Non-Flammable gases – 2.2.
How many volumes is IMDG Code?
two books
The IMDG code consists of two books (volume 1 and volume 2), and the IMDG code supplement.