How do I reset my NETGEAR C3000 router?

How do I reset my NETGEAR C3000 router?

To reset the Netgear C3000 to its default settings, you have to do the following steps:

  1. Switch on router.
  2. Press Reset button and hold for at least 7 seconds.
  3. Device restarts automatically.
  4. Router has been reset to factory settings.

Does NETGEAR C3000 have WPS button?

Press the WPS button on the modem router for 3–5 seconds. 2. Within two minutes, on your computer or WiFi device, press its WPS button or click its onscreen WPS button.

How do I turn off WiFi on NETGEAR C3000?

Select ADVANCED > Advanced Setup > Wireless settings. The Advanced Wireless Settings page displays. Scroll down to the wireless band to turn off.

How do I troubleshoot my NETGEAR modem?

To troubleshoot wireless network problems:

  1. Turn off the wireless function and directly connect your computer to the router with an Ethernet cable.
  2. Reboot the computer and check for an internet connection.
  3. If there is still no internet connection reboot the router and any modems in use.

What do the lights on my Netgear router mean?

Solid green or white: Your router is ready. Solid amber: Your router is powering on. Blinking amber: Your router’s firmware is upgrading or the Reset button was pressed. Blinking white: Your router’s firmware is corrupted. Blinking white and amber: If you have an R8000 router, your router is in AP mode.

How do I enable WPS on my Netgear router?

To use Wi-Fi Protected Setup (WPS) to connect to your NETGEAR WiFi network:

  1. Make sure that your router is turned on (the Power LED is lit).
  2. If possible, move your WiFi devices that you want to connect to the same room as your router.
  3. Check the WPS instructions for your WiFi device.
  4. Press the (WPS) button on your router.

Where is the wireless on/off button on Netgear router?

To turn your NETGEAR router’s wireless radios on using the WiFi On/Off button: Press the WiFi On/Off button on the top of the router for two seconds.

What lights on my modem should be on?

The power light, downstream indicator, upstream indicator, online indicator, and link light on your modem should all be green. If your power light is yellow, it may be upgrading, so leave the modem on and give it a little time to do its thing.