Where does the blue wire go on a router?

Where does the blue wire go on a router?

f. Securely insert the blue cable that came with your router into a LAN port on the router such as LAN port 4 (point C in the diagram), and the other end into the Ethernet port of your computer (point D in the diagram). Your network cables are connected and you are ready to restart your network.

How do you cut a network cable?

Cut into the plastic sheath about one inch (2.5 cm) from the end of the cut cable. The crimping tool has a razor blade that will do the trick with practice. Unwind and pair the similar colors. Pinch the wires between your fingers and straighten them out as shown.

What speed is the blue ethernet cable?

If the cable has 4 twisted pairs (Orange, Green, Blue, Brown) then it’s capable of 1gbps link speeds, provided there’s a gigabit adapter/switch at both ends. Cable 3 is a Cat5E, which is definitely capable of gigabit speeds. The other cables are, most likely, also Cat5 or Cat5E.

What is the difference between a blue and yellow ethernet cable?

The differences between blue and yellow ethernet cables link to whether they are for terminal server connections or power over ethernet (POE). The outer colors of these cables do not suggest differences in their functions, such as speed and reliability, but more for their purpose and use within an internet set-up.

Are all Ethernet cables blue?

What wires go into a router?

A router and modem can be properly installed using two Ethernet cables, a coaxial cable, and the power cords supplied with both devices.

How do you release an Ethernet cable?

Remove an Ethernet Cable

  1. Locate the cable to be removed.
  2. Loosen the thumbscrews and remove the cover for the cable management bracket.
  3. Grasp the cable connector to support its weight and apply the removal force.
  4. Disconnect the cable from the connector.
  5. Carefully move the cable out of the cable management hardware.

What is the difference between Cat 5 and Cat 6?

Compared to Cat5/5e cables, Cat6 cables have stricter performance specifications and significantly higher data transfer speeds at greater distances. They are more tightly wound than Cat5 cables, and the cable conductors and cable sheath are thicker as well.