What is conical strainer used for?
What is conical strainer used for?
A chinois is a cone-shaped sieve made with fine metal mesh. It’s traditionally used for straining things that are intended to be very smooth, like stocks, sauces and soups. It usually has a metal or plastic handle and a little overhang on the opposite side, in order to rest it upright in a tall pot or a sink.
How do pipe strainers work?
By definition a strainer provides a means of mechanically removing solids from a flowing liquid. They do this by utilizing a perforated metal, mesh or wedge wire straining element.
What is the function of a strainer?
Strainer can be defined as a pipe fitting through which liquid is passed for purification, filtering or separation from solid matter; anything used to strain a liquid; any device functioning as a sieve or filter used to prevent solid bodies from mixing in a liquid stream or flowline.
Are cone shaped strainer used for straining stock?
chinois
Simply put, a chinois is a cone-shaped metal strainer with a very fine mesh. Also known as a china cap, a chinois is used for straining stocks, sauces, soups, and other items that need to have a very smooth consistency.
How do you clean a conical strainer?
Turn the strainer upside-down and hold it under a running faucet. ¹ Dip a bristle brush in the soapy water and use it to scrub the strainer clean. ¹ If you don’t have a bristle brush, use an old, sterilized toothbrush instead.
Can a strainer be installed on its side?
Y strainers are a valuable addition to many piping systems as they can be installed vertically or horizontally. Add that to the fact that they can be used to transport steam, gas, or liquid, they are an excellent choice for a strainer.
What is a strainer with blowdown?
On applications where significant amounts of debris are expected, a blowdown valve can usually be fitted in the strainer cap, which enables the strainer to use the pressure of the steam to be cleaned, and without having to shut down the plant.
Do Y strainers work vertically?
They are most frequently used in pressurized lines for gas, steam, or liquid. While it is most common to see Y strainers installed horizontally, they can be installed vertically as well.
What is strainer in pump?
The primary function of a strainer in a pump system is to serve as a filter for the pump and the piping. This may seem like such a simple task but this component is not to be taken for granted. Although it is not always visible, over time, tiny sediments such as sand, dirt or grit can build up in the pipeline.
How to install a conical strainer?
Installation of a conical strainer can be done in one of two different ways, cone facing upstream or cone facing downstream. When cone is downstream, debris collects inside of the cone near the tip and cone may rip apart due to heavy strain on the tip.
What is the flow direction of the fluid being strained?
The flow direction of the fluid being strained is from the outside of the element to the hollow core, which is formed by the spaces between the main discs. This means that any debris is trapped on the outside surface of the discs.
Can a strainer be installed in a vertical pipeline?
Although it is advisable to install strainers in horizontal lines, this is not always possible, and they can be installed in vertical pipelines if the flow is downwards, in which case the debris is naturally directed into the pocket (Figure 12.4.2 (c)).
What is main disc of conical strainer?
Main disc of conical strainers is made to fit between flanges of rating as per main pipe specification. Check out these dimensions for conical and basket strainers as per EATON catalog.