How do I make my Audi headlights brighter?

How do I make my Audi headlights brighter?

  1. Upgrade your headlight bulbs to LED. LEDs (light-emitting diode) are the brightest headlight bulbs.
  2. Upgrade your headlight bulbs to HID.
  3. Clean your headlights with a headlight restoration kit.
  4. Retrofit your headlights & fog lights.
  5. Buy premium halogen bulbs.

How can I make my headlights clear again?

All you need to do is apply toothpaste liberally to the affected area using a clean rag or even an old toothbrush. After you have rubbed the toothpaste in well enough, give it a rinse and a rub down with another clean rag and your Toyota RAV4 headlights will look good as new.

How do I clean oxidized headlights?

Dampen a clean, soft cloth in water, and add a dab of toothpaste. Use toothpaste-laden cloth – Firmly rub the surface of your headlights with the toothpaste-laden cloth in small circles. Add water and toothpaste as needed, and expect to spend up to five minutes cleaning each affected light.

Do LED headlights need washers?

It is a widespread fallacy that headlamp washers are only compulsory for xenon lights. This is wrong on several counts. The latest generation of xenon, the 25-Watt version, doesn’t actually need one at all. Meanwhile, halogen and LED headlamps do need one if their light sources emit more than 2000 lumens.

What is the best headlight protection for my Audi?

The protective film will ensure your headlights achieve the greatest level of visibility possible. Headlight protection kits start as low as $10 online, and can be changed easily. They are also available through local auto parts stores. X-Pel is the go-to brand for the Audi and comes highly recommended by many Audi owners.

How do you remove the alignment dowel from a headlight headlight?

Remove the three connecting bolts and unplug the harness connector. Rotate the outward facing corner of the headlight away from your car. Release the alignment dowel from the white plastic bracket. It’s located on the lower (inside) corner of the headlight. Lift the headlight up and over your bumper.

How do you fix a discolored headlight?

Starting with three to four grades of sand paper, which should all come with your headlight restoration kit, ranging in grit sizes from 500 to 2,500, go ahead and apply a rubbing compound to your first headlight lens, and then begin removing the heavy discoloration from your headlights.

How do you remove the headlight from the bumper?

It’s not necessary to remove the bumper to access and remove the headlight. Remove the three connecting bolts and unplug the harness connector. Rotate the outward facing corner of the headlight away from your car. Release the alignment dowel from the white plastic bracket. It’s located on the lower (inside) corner of the headlight.