What is a 3/16 drill bit in metric?
What is a 3/16 drill bit in metric?
| Drill Bit Hole Diameters | ||
|---|---|---|
| Metric Size | Fractional Size | |
| 1 mm | .0394 | 5/32 |
| 2 mm | .0787 | 11/64 |
| 3 mm | .1181 | 3/16 |
Do drill bits come in metric sizes?
The only difference between drill bits found in the U.S. and metric drill bits is that metric drill bits are measured in the metric system. Instead of finding a 1/4-inch bit, you’ll find a 6-milimeter bit.
What is a 1/16 drill bit in metric?
Downloadable versions:
| Drill size | Diameter (in) | Diameter (mm) |
|---|---|---|
| 1/16 in | 0.0625 | 1.5875 |
| 1.6 mm | 0.0630 | 1.6000 |
| #52 | 0.0635 | 1.6129 |
| 1.7 mm | 0.0669 | 1.7000 |
What size drill bit is 14mm?
Metric Tap and Drill Bit Size Table
| Tap | Metric Drill | US Drill |
|---|---|---|
| 12mm x 1.5 | 10.7mm | 27/64″ |
| 14mm x 2.0 | 12.2mm | – |
| 14mm x 1.5 | 12.7mm | – |
| 16mm x 2.0 | 14.2mm | 35/64″ |
How can you tell if a drill bit is 10mm?
Check the Shank Typical drill bits have markings somewhere on the shank above the threads. It’s small, but it usually has the drill-bit diameter stamped into the metal; the number is written in fractions. For example, the markings may read: 1/4-inch, 3/6-inch or 25/32.
What size drill bit is 25mm?
Drill Bit Size Chart
| Size | Decimal Equivalent | Decimal Equivalent |
|---|---|---|
| 90 | 0.0087 | 1.0469 |
| 89 | 0.0091 | 1.0625 |
| 88 | 0.0095 | 1.063 |
| .25 mm | 0.0098 | 1.0781 |
What does 10mm equal in standard?
3/16″ 3/8″
Standard / Metric Wrench Conversion Chart
| Bolt Diameter | Standard | Metric |
|---|---|---|
| 3/16″ | 3/8″ | 10mm |
| 1/4″ | 7/16″ | 11mm |
| 5/16″ | 1/2″ | 13mm |
| 3/8″ | 9/16″ | 14mm |
What size is 6 mm drill bit?
1/4″
6mm Drill Bit (~1/4″)
What are the standard drill sizes?
What are the standard drill sizes? Range 1 (R1) is shortest in length, more common for sizing production tubing or casing, and ranges from 18 to 22 ft. Range 2 (R2) is considered the standard length for drill pipe and ranges from 27 to 31 ft. Range 3 (R3) is common in casing and also deployed in deep water drilling applications.
What is the drill size for a 6 48 tap?
The drill size chart contains tools up to 1.5 inches in diameter, but larger tools are also commonly used. For each thread count, the equivalent thread pitch is provided and for metric taps, the approximate thread count is shown based on the pitch.
What size drill bit for a 10-24 tap?
The correct size drill bit for 10-24 tap is a #25 drill bit, the measurement being 5/32”. A 10-24 cap comes in two different thread counts. Thus the size of the drill bit for each one is entirely different.
What size is a standard drill bit?
This final drill chart covers the standard bit sizes from 43/64 to 1 27/64. More About Drill Bit Sets and Sizing Some other helpful information to help you in your knowledge of drill bit sizes: Fractional Sizing Fractional sizing uses whole, half (1/2), quarter (1/4), eighth (1/8), sixteenths (1/16) and sixty-fourths (1/64).