How do I know what model Kenmore I have?
How do I know what model Kenmore I have?
Check the back of the washer’s control panel, the upper left-hand corner of the back of the washer or the lower left-hand corner on the front of the washer. The model number might also be on a sticker under the lid or on the inside right back corner — open the lid to check this location.
How do I find out what year my Kenmore washer is?
Locate the serial number on a Kenmore washer made by Whirlpool. The second letter of the serial number identifies the year the machine was manufactured. For instance, “L” represents 2001, “M” means 2002 and, continuing through the alphabet, “Y” means 2009.
Where is drain pump on Kenmore front load washer?
The drain pump is located in the lower front corner of most Kenmore front-loading machines, and the most difficult part of the job may be getting to it. If the machine doesn’t have an access panel, as some do, you’ll have to take the entire front panel off.
How do I tell what size my Kenmore washer is?
How do I find the capacity of my Kenmore washer?
- Measure the depth inside the washer with a measuring tape.
- Measure the diameter of the tub.
- Divide the diameter by two, and square it.
- Multiply the number calculated in Step 3 by the depth of the tub.
How do you know if your washing machine drain pump is broken?
Put your finger into the drain outlet and feel the impellers if the pump freely turns. One or more of them may be broken. If so, you’ll be able to feel them while you’re turning the pump flywheel with your other hand. You also may see broken pieces of plastic in the bottom of the pump housing.
How do I know if my Kenmore washer pump is bad?
Check the pump pulley by removing the pump from the washer and trying to rotate it by hand. If the pulley doesn’t turn freely and is frozen or stiff, replace it. Also, if the agitator is moving but the tub isn’t, this is a sign the pump is dying.