How do I assemble my Philips AVENT manual breast pump?

How do I assemble my Philips AVENT manual breast pump?

How do I assemble my Philips Avent manual breast pump?

  1. Insert the valve. Insert the white valve into the pump body from below.
  2. Attach the bottle or storage cup. Screw the pump body clockwise onto the bottle or storage cup until it is securely fixed.
  3. Silicone diaphragm.
  4. Snap on the handle.
  5. Attach the massage cushion.

How do I use the manual breast pump Avent?

Hold the funnel against your breast with one hand, and depress the handle with the other. The Avent Manual Breast Pump has silicon petals that stimulate the nipple for better let-down. Press the handle five to six times; hold to stimulate let-down the same way a nursing baby would.

How do I clean my Avent manual breast pump?

Clean all parts (except motor unit and adapter) in hot water with some mild washing-up liquid and then rinse them thoroughly. You can also clean the parts in the dishwasher (on the top rack only). To clean the valve, rub it gently between your fingers in warm water with some washing-up liquid.

How do you assemble a Philips AVENT double electric breast pump?

Assembling your breast pump

  1. Insert the white valve into the pump body from underneath.
  2. Screw the pump body clockwise onto the bottle until it is securely fixed.
  3. Place the silicone diaphragm into the pump body from above.
  4. Place the massage cushion into the funnel-shaped section of the pump body.

How do you assemble a Philips breast pump?

How to assemble the Philips Avent electric breast pump

  1. Wash your hands thoroughly with soap and water.
  2. Push the white valve into the pump as far as possible.
  3. Screw the bottle onto the pump body.
  4. Place the cushion into the pump body.
  5. Push the inner part of the cushion in the funnel up to the line (indicated with an arrow)

Do I need to sterilize breast pump after every use?

All breast pump parts that come in contact with breast milk, such as bottles, valves and breast shields, should be cleaned after each use. It is not possible to completely sterilize breast pump parts at home, even if you boil them. However, sterilization is not necessary to keep these parts safe and sanitary.