What sizes do drawer pulls come in?
What sizes do drawer pulls come in?
Standard Drawers (about 12″ – 36″) Standard-sized drawers can use any of the following pull sizes: 3” (one or two), 4” (one or two), 96mm, and 128mm.
Do cabinet pulls come in standard sizes?
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another). Standard knob sizes are 1 1/4″ or 1 3/8″.
Are all drawer pulls the same size?
There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.
What size pulls for 36 inch drawer?
Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.
How big should your cabinet pulls be?
3 inches to 5 inches long
Let’s start with some Of our basic rules of thumb When It Comes TO Selecting Cabinet Pulls: Standard size cabinets up to 30” wide for drawers, or 34” tall for doors: 3 inches to 5 inches long pulls are often a good choice. (see image below for examples)
What size pulls for 36 drawer?
How do you measure for new drawer pulls?
Place the drawer pull on a work surface with the threaded posts facing up. Measure from the center of the screw hole in one threaded post over to the center of the other screw hole with a tape measure. This is the measurement required when selecting replacement pulls.
What size cabinet pulls for 30 inch drawers?
As we mentioned above, for cabinet drawers 30 inches wide or more we would recommend a pull 5 inches or longer, OR two pulls 3 inches to 5 inches long each. This is necessary because the longer a drawer gets the more weight it can hold and the harder it may be to open.