Can I use and iMac G4 as a monitor?

Can I use and iMac G4 as a monitor?

No, not without modding. The iMac G4 has no display input. Just take the panel and driver board out of a standard monitor, the mounting should be similar.

How do I display two monitors on a Mac and laptop?

How to get your external monitor to show a different desktop.

  1. Go to’ system preferences’ in the Apple menu, and then to ‘ displays’ and click on the ‘arrangement’ tab.
  2. Deselect the box that says ‘ Mirror Displays’
  3. You have now turned off mirroring and should have two separate desktops!

What can you do with an iMac G4?

The ability to make videos, music, podcasts, photos, or any other creative endeavor is pretty much frictionless, now—modern Macs are set up so you can be up and running in no time. The iMac G4 was the start of that trend.

Can you dual monitor with a Mac and PC?

You can attach a second monitor to your Mac to increase the viewing area for your computer. The mini displayport included on your computer allows you to export the video from the graphics card to external displays. Your Mac can work with any monitor with a DVI or VGA connection even if the display came from an old PC.

How do I connect my Apple desktop to my laptop?

Follow the below steps to connect a MacBook to an iMac:

  1. Step 1: Determine the cable you’ll need for your iMac.
  2. Step 2: Locate the port on your MacBook.
  3. Step 3: Turn on both computers.
  4. Step 4: Connect the Mini DisplayPort or Thunderbolt cable to both computers.
  5. Step 5: Press Command + 2 on the iMac.

How do I extend my Mac screen on a Windows laptop?

Phase 5: Extend Mac Display to Windows Screen After you’ve connected both devices, the Mac will give you two options: mirror mode and expand mode. If you want to use the extend mode, go to the AirPlay menu, choose AirPlay Display, and then choose Extend Desktop, and there you have it!

Can I use iMac as a monitor for laptop?

You can use more than one iMac as a display, if each iMac is using a Thunderbolt cable to connect directly to a Thunderbolt port on the other Mac (not the other iMac). Press Command-F2 on the keyboard of the iMac. You should now see the desktop of the other Mac. To exit target display mode, press Command-F2 again.