Why does My AcuRite thermometer not work?
Why does My AcuRite thermometer not work?
If the temperature or humidity is inaccurate, please confirm the following: Make sure both the display unit and AcuRite Iris™ (5-in-1) sensor are placed away from any heat sources or vents. Make sure both the display unit and AcuRite Iris™ (5-in-1) sensor are positioned away from moisture sources.
How do I activate My AcuRite weather station?
Simply remove the batteries, unplug the display, replace the batteries, and plug the display back in to power cycle the unit. Visit acurite.com/support for additional help on Wi-Fi Setup.
How long does it take an AcuRite weather station to learn?
After 14 days, the Learning Mode icon disappears from the weather station screen (example pictured on left). At this point, the self-calibrated pressure is reasonably accurate (although the algorithm continues to run; 4,000 readings = 33.33 days) and the weather forecaster is ready for superior weather prediction.
How do you reset an AcuRite thermometer?
You will need to remove the battery cover and locate the reset button. With a pen or paper clip, press and hold the reset button for about 5 seconds until the screen flashes. Release the button and replace the battery cover. The thermometer will now be reset.
Where do I find my AcuRite device ID?
If you are using the Wi-Fi HD display or PC Connect Unit, the Device ID is located on a white sticker on the back of the indoor display. If you are using an AcuRite Access®, the Device ID is located on the bottom of the Access.
Can you calibrate an AcuRite weather station?
The indoor/outdoor temperature and humidity readings, as well as the Barometric Pressure, can be calibrated on the display to improve accuracy.
How accurate are AcuRite weather stations?
Pro Accuracy Units: Temperature: +/- 0.5 degrees Fahrenheit. Humidity: +/- 2% Relative Humidity.
How do I reset my AcuRite temperature sensor?
Hard Reset:
- Bring both the sensor and display unit together and power down by removing all batteries from each and/or removing the power cord.
- Change the A-B-C switch on both units to a new, matching channel then press and hold the reset button on the display for 20 seconds if applicable.