How do I connect my ViewSonic projector?

How do I connect my ViewSonic projector?

Check the projector’s device name on the projector at Home > Screen Mirroring. (e.g. “ViewSonic PJ-XXXX”)…How to cast an Android phone to a smart projector

  1. Open Settings.
  2. Tap on Connection & sharing.
  3. Then tap on Wireless display.
  4. Choose “ViewSonic PJ-XXXX” to mirror your screen.

How do you turn on ViewSonic projector?

Starting the Projector

  1. Ensure the projector is connected to a power source or that the battery has sufficient charge.
  2. Push the Power Switch to turn on the projector, and press the Power button on the remote control.
  3. Move the Smart Stand to your desired viewing angle.

How do you charge ViewSonic m1?

To charge your mobile device:

  1. Turn off the projector by pushing the Power Switch.
  2. Use the USB Type A port on the projector to connect to a mobile device.
  3. A 5V/1A power charge can be provided to the mobile device.

How do I connect my phone to my ViewSonic projector?

Why is my ViewSonic projector not working?

Ensure the power cord is properly attached to the projector and to the power outlet. If the cooling process has not completed, please wait until it has finished then try to turn on the projector again. If the above does not work, try another power outlet or another electrical device with the same power outlet.

Why is my Viewsonic projector not working?

How do you charge ViewSonic?

Connect the power adapter to the USB-C Port on the side of the projector (5V/1.5A). NOTE: Charge the projector for 2.5 hours via the power adapter before using it in battery mode for the first time. The DC IN port can accept 5V or 9V charging; however, 9V charging can only work in the Power On mode.

How do I mirror my iPhone to my ViewSonic projector?

There are 2 ways to mirror from iPad, iPhone (4 or later), or iPod Touch (4th Gen or later): 1. Use an Apple original “Lightning Digital AV Adapter” or “USB-C Digital AV Multiport Adapter” to connect your device to a ViewSonic projector. You might encounter no signal if you don’t use APPLE original adapter.

Why is my ViewSonic screen black?

If the Viewsonic Logo is on the display it could mean that the source is not being detected correctly. If it is projecting a black screen then it could mean that the lamp has failed and need to be replaced.

How do I get my projector to show the screen?

What to Know

  1. Plug an HDMI cable into your laptop and the projector (using an adapter if necessary), then turn on the projector and open the lens.
  2. Open the display settings on your laptop and adjust as necessary.
  3. Use mirror display to project your desktop, or extend display for the projector to act as a second monitor.

https://www.youtube.com/watch?v=IVZTxUcnFdM