How do I reset my Vokera Mynute boiler?
How do I reset my Vokera Mynute boiler?
Using the mode switch, turn it two clicks to the left (reset position) then turn it back to the ‘on’ position. Allow a period of two minutes to elapse before turning the mode switch to the reset position.
What does A01 mean on my Vokera boiler?
ignition failure
1. Vokèra Linea fault code 10 (Vokèra Compact code A01) This fault code suggests that there is an ignition failure with the boiler. You might also hear the boiler sparking up but failing to ignite. Potential fix: To fix this issue, your qualified engineer will aim to test the voltage going to the gas valve.
Why is my Vokera boiler flashing green?
Flashing green lights When the green light is constantly on it means the flame is working, but a flashing green light could be due to a faulty hot water sensor or because it is in standby. A reset may be enough but if not you may need to get in touch to arrange an engineer to diagnose the issue.
Is the Vokera Mynute he a combi boiler?
Which is the Best Combi Boiler?…Specification.
Manufacturer | Vokera |
---|---|
Model | Mynute HE |
Fuel Type | Gas |
Type | Conventional |
Method | Condensing |
How do you reset a Vokera boiler?
To reset your Vokera boiler, move the mode selector switch to the ‘OFF/RESET’ position and then move it back to either ‘hot water only’ or ‘heating and hot water’. Should this reboot get your boiler working again then you’ll know because there will be a constant green light.
How do you reset Vokera?
If you want to reset your Vokera boiler, you need to move the mode switch to the ‘OFF/RESET’ position and then back to either ‘hot water only’ or ‘heating and hot water’. There will be a constant green light if the boiler gets working again.
Why is the light flashing on my boiler?
Usually, when modern boilers need resetting they will display a fault code or begin to flash a red or green light. These signals indicate that your boiler senses a problem, which is why it has stopped working and needs to be reset.