How do I reset my HP ProLiant microserver?

How do I reset my HP ProLiant microserver?

Firstly press F8 at the appropriate part of the boot sequence:

  1. The config tool opens on the option to set defaults:
  2. So just hit enter and then F10 to confirm:
  3. That’s it – the trial license will now work again.

How do I reset my HP server to factory settings?

To reset iLO to the factory default settings:

  1. Optional: If you access the server remotely, start an iLO remote console session.
  2. Restart or power on the server.
  3. Press F8 in the HP ProLiant POST screen. iLO RBSU starts.
  4. Select File→Set Defaults.
  5. Press F10 to continue.
  6. Press Enter.

What is a HP ProLiant MicroServer?

HP’s ProLiant MicroServer Gen8 is an affordable starter server for businesses that need nothing more than centralized file services, printer management, and light virtualization.

How do I factory reset my iLO?

Resetting iLO to the factory default settings

  1. From the System Utilities screen, select System Configuration > iLO 4 Configuration Utility > Set to factory defaults, and press Enter.
  2. Select YES, and press Enter.
  3. When prompted to confirm the reset, press Enter.
  4. Resume the boot process:

How do you reset Nvram on HP Proliant?

Power off the server and toggle the maintenance switch to the OFF position.

  1. shut down the server and disconnect the power plugs.
  2. change position 6 back to “off”
  3. connect the power plugs and power up the server.

Does HP MicroServer have iLO?

HPE ProLiant MicroServer Gen10 Management With the HPE MicroServer Gen10, one does not have access to iLO. Remote management tools have become one of the most important features to manage servers in data centers and the edge. The fact that the HPE MicroServer Gen10 does not have iLO we can understand.

What is a HP ProLiant MicroServer Gen8?

HPE ProLiant MicroServer Gen8 is a small, quiet, and stylishly designed server that is ideal for micro and small businesses looking to build their first IT server environment.

How do I reset my HPE iLO 5?

From the System Utilities screen, click System Configuration, and then click iLO 5 Configuration Utility. Select Yes in the Reset iLO menu. The iLO 5 configuration utility prompts user to confirm the reset. Click OK.

How do I reset my HP iLO IP address?

From the iLO RBSU screen, select network→DNS/DHCP, and then press Enter….Configuring a static IP address (iLO RBSU)

  1. To set DHCP Enable to OFF, press the spacebar, and then press F10 to save the changes.
  2. Select DHCP Enable.
  3. To set DHCP Enable to OFF, press the spacebar, and then press F10 to save the changes.

What is iLO enablement?

The iLO Enablement Kit includes the following features: An activation key for remote management to the server. A dedicated iLO NIC port. iLO 5 Essentials features: Email-Based Alerting, Integrated Remote Console (IRC/Virtual KVM – Supports text and graphics) and Virtual Media via Integrated Remote Console.