How much overhang are you allowed on a trailer in Alberta?

How much overhang are you allowed on a trailer in Alberta?

35%
Overhang: Center of rear axle group to end of trailer or load must not exceed 35% of trailer wheelbase (measured as Kingpin to center of rear axle group) or else it will need to be permitted.

Do you still need a TAC permit in Alberta?

Members operating in Alberta are encouraged to obtain a TAC (Transportation Association of Canada) permit, which is specifically for tridem axles on local roads. An annual TAC permit is good for an entire fleet. Both tridem drive trucks and trailers need this permit, but one permit covers all equipment in the fleet.

How much is an overweight ticket in Alberta?

Alberta Oversize and Overweight Fines and Penalties

WEIGHT FINE
13,001 – 14,000 lbs $5.60
14,001 – 15,000 lbs $6.25
15,001 – 16,000 lbs $7.25
16,001 – 17,000 lbs $8.25

What is a dimensional load?

What is a dimensional load? A dimensional load is larger or heavier than a typical carload shipment moved by rail. Because dimensional loads cannot move as efficiently as other shipments can in the normal flow of rail traffic, they require additional rail capacity and resources.

How far can a load stick out of a truck Alberta?

If a vehicle’s load extends 1.5 metres (5 feet) or more beyond the rear of the vehicle, the following is required: During daylight hours, a red flag should be attached to the end of the extension or load.

What is a TAC vehicle?

CAR’s Technology Advisory Council (TAC) provides a voice of the industry, with valuable insight and guidance for issues that are critically important to the industry from an auto manufacturer’s perspective. The advisory council consists of individuals with engineering, manufacturing, or supply chain backgrounds.

Who has to stop at weigh stations in Alberta?

all commercial vehicles
The posted requirement at the permanent weigh scale inspection stations is for all commercial vehicles to stop if they have a gross mass in excess of 4,500 kilograms. In practice, commercial vehicles such as busses do not adhere to this requirement.

How wide of a load can I haul in Alberta?

Legal load limits. Length: The overall maximum length allowed in Alberta without a permit is 23 meters (75′ 3″). Width: The maximum width allowed is 2.6 meters (8′ 6″’). Height: The maximum height allowed in Alberta is 4.15 meters 13′ 7″. Weight: 6,000 kg maximum on steer axle.