What are reboilers made of?
What are reboilers made of?
Typically, the reboiler and overhead system should be constructed of stainless steel or other suitable materials to resist acid gas corrosion.
What is a reboiler used for?
Reboilers are heat exchangers typically used to provide heat to the bottom of industrial distillation columns. They boil the liquid from the bottom of a distillation column to generate vapors which are returned to the column to drive the distillation separation.
What are thermosiphon reboilers?
June 2, 2020. Thermosyphon Reboiler:- A reboiler is an equipment which is installed with the distillation column and its purpose is to convert the liquid which is provided by the bottom tray of the distillation column into vapours. These vapours are then returned to the distillation column.
Why do we use kettle reboiler?
A kettle reboiler is designed to allow a heating fluid to pass through tubes that are covered in the liquid you want to be distilled. As the liquid heats up and boils, it is sent to the distillation column and condensed by cooling liquid.
How many types of reboilers are there?
Two types of reboilers are available for use; the kettle-type and the thermosyphon. A kettle-type reboiler is similar in design and appearance to the shell and tube exchanger.
What is condenser duty?
A condenser is designed to transfer heat from a working fluid (e.g. water in a steam power plant) to a secondary fluid or the surrounding air. The condenser relies on the efficient heat transfer that occurs during phase changes, in this case during the condensation of a vapor into a liquid.
What are the types of condenser?
There are three main types: air-cooled, evaporative, and water-cooled condensers.
What are the 4 types of condenser?
The major types of condensers used are (1) water-cooled, (2) air-cooled, and (3) evaporative. In evaporative condensers, both air and water are used. Three common types of water-cooled condensers are (1) double pipe, (2) shell and tube (as shown in Fig. 6.9), and (3) shell and coil.
What is the principle of condenser?
Principle of operation A condenser is designed to transfer heat from a working fluid (e.g. water in a steam power plant) to a secondary fluid or the surrounding air. The condenser relies on the efficient heat transfer that occurs during phase changes, in this case during the condensation of a vapor into a liquid.