How do you mix Thistle bonding jacket?
How do you mix Thistle bonding jacket?
Thistle Bonding Coat is pre-mixed with aggregate and only clean water needs to be added to prepare it for use. Mixing should be carried out in a clean tray or bath. Excessive mechanical mixing should be avoided. Tools and water used in mixing must be clean.
Do I need to PVA after bonding coat?
Bonding about 2-3 hours, but some do leave it to following day before skimming depends on size of area. There is absolutely NO need for PVA when skimming over bonding the same day or the next day.
What is the mix ratio for bonding plaster?
How much water do I need? According to British Gypsum, you should mix 11.5 litres of water to one bag of multi-finish plaster. Now without sounding too self-explanatory, if we follow this advice we should get the perfect amount of water to plaster ratio.
How do you use thistle bond?
Simply apply it by roller straight from the tub for a strong chemical key. It also includes aggregate particles for better mechanical bonding. The bonding agent is green so it’s easy to see where you’ve treated, and it’s quick to apply as you only need a single coat for the full effect.
Can you paint over bonding?
If you have some multifinish at hand, I’d put a skim coat of that on top of the bonding first, but if you don’t then go right ahead and paint the bond coat directly. It’ll soak up your paint, so you should probably put on a couple of layers of diluted paint first mainly to seal it.
Do I need to PVA before bonding?
PVA for Bonding Adding a coat of the glue to your wall surface just before you start plastering helps to bond the plaster to the wall. The PVA literally helps to stick the plaster in place in the same way it can bond two pieces of wood together.
Should you PVA before bonding coat?
How much water do I put on a plaster coat?
MIXING PLASTER STEP 1. Plaster and water are mixed on a roughly 50/50 basis. Therefore, to make a single bucket of plaster, you will need half a bucket of thoroughly clean and fresh water (clean enough to drink).
How long does Thistle bond it take to dry?
24 hours
ThistleBond-it should be allowed a minimum of 24 hours drying time, however, this can be dependent on both environmental conditions and ventilation. ThistleBond-it should be stored in a dry, cool and frost-free environment.