How do I add a constraint in SolidWorks sketch?
How do I add a constraint in SolidWorks sketch?
Click Options (Features toolbar) or Insert > FeatureWorks > Options . Click Dimensions/Relations and select Enable Auto Dimensioning of Sketches and Add constraints to sketch. Click OK.
How do I make a line a certain length in SolidWorks?
To change the length of the line, select one of the endpoints and drag to lengthen or shorten the line. To move the line, select the line and drag the line to another position. To change the angle of a line, select an endpoint and drag to a different angle.
What does it mean when constraints are unsolvable in SolidWorks?
The dimension of 100 creates an unsolvable sketch because it is impossible for that dimension to exceed the total of the two other triangle sides. The unsolvable sketch is shown in yellow. Potential Solution: Sketch solved by changing the dimension to a solvable dimension value.
Where are the constraints in Solidworks?
The constraints can be driven global variables or sensors for mass properties, dimensions, and simulation data. On the Variable View tab or Table View tab of the design study, in Constraints section, do one of the following: Select a predefined sensor from the list.
How do you join a line segment in Solidworks?
To combine two split sketch entities into one: In an open sketch, click the split point and press Delete. Search ‘Combining Split Entities’ in the SOLIDWORKS Knowledge Base.
How do you change the line thickness of a sketch in Solidworks?
To set line thickness:
- In a drawing, click Tools > Options > Document Properties > Line Thickness.
- In the dialog box, under Line thickness print settings, enter a value for the line weights (Thin, Normal, Thick, and five additional line thickness settings).
- Click OK.
Why is it necessary to constrain a 2 D sketch?
Constraints can also be manually applied after the sketch geometry exists to stabilize sketch shape or position. These geometric constraints allow the sketch to be edited with predictable results.
What does blue mean solidworks?
is not fixed
Under defined Blue indicates that the entity is not fixed, and light blue indicates that the entity is selected. To add relations to a sketch, click Add Relations on the Dimensions/Relations toolbar.
What are constraints called in SolidWorks?
Define constraints to specify the conditions that your design must satisfy. The constraints can be driven global variables or sensors for mass properties, dimensions, and simulation data.
How do I constrain a part in SolidWorks?
To define assembly constraints:
- Under Tolerance Assembly, select a part to constrain in the simplified assembly.
- Set the primary constraint by clicking 1 in the callout constraint of plane P6.
- Set another constraint.
- Set a tertiary constraint.
- Click .