How do I clear the jam in my tray 2 HP printer?

How do I clear the jam in my tray 2 HP printer?

Clear paper jams in Tray 2

  1. Remove the tray from the printer.
  2. Remove the paper from the tray, and discard any damaged paper.
  3. Verify that the rear paper guide is adjusted to the indentation for the correct paper size.
  4. Load the paper into the tray.
  5. Reinsert and close the tray.
  6. Press the front-door-release button.

How do you fix a paper jam 2 tray?

Removing Paper Jammed in Tray 2 (Optional)

  1. Hold the grip on tray 2, lift the tray slightly ( ), and then pull it out ( ). Pull tray 2 completely out. Take care not to drop it.
  2. Remove jammed paper.
  3. Push tray 2 gently in until it stops. Printing starts. Blank paper may be delivered after printing resumes.

How do I Unjam my HP Laserjet m404dn?

Clear paper jams in the fuser

  1. Press the front-door-release button. Figure : Open the front door.
  2. Open the front door. Figure : Open the front door.
  3. Remove the toner cartridge. Figure : Remove the toner cartridge.
  4. Lift the jam-access cover.
  5. Remove any jammed paper.
  6. Install the toner cartridge.
  7. Close the front door.

How do I remove a printer tray?

Remove and/or Install the Paper Trays

  1. Open the paper tray and remove any paper.
  2. Pick up the front of the tray, pull it out slightly, and lower the tray back down so it is level.
  3. Pull the right side of paper tray out. Move the paper tray to the right and take the tray out of the machine.

How do I fix the jam on my HP output bin?

Solution three: Clear a paper jam in the output bin area

  1. Open the top cover. Figure : Open the top cover.
  2. Pull out the green tab to release the jam-access cover.
  3. Remove any jammed paper.
  4. Close the jam-access cover.
  5. Close the top cover.
  6. If the error message still displays on the control panel, press OK to clear it.