How do I know if the ballast needs to be replaced?

How do I know if the ballast needs to be replaced?

If your fluorescent lighting is displaying any of the signs below, it could be a symptom of a bad ballast:

  1. Flickering.
  2. Buzzing.
  3. Delayed start.
  4. Low output.
  5. Inconsistent lighting levels.
  6. Switch to an electronic ballast, keep lamp.
  7. Switch to an electronic ballast, switch to a T8 fluorescent.

Can I change a ballast without turning off power?

Although changing a ballast is safer with the power off, sometimes it is impractical, such as in a crowded store or office space, and you must replace the ballast without cutting the power. This can be done safely with some preparation and the right tools.

Why do ballasts fail?

Ballast failure is often caused by the surrounding environment—mainly heat and moisture. When it’s too hot or too cold, a ballast can burn or fail to start your lamps. Heat, along with continuous condensation inside an electronic ballast, can cause corrosion over time.

How long does ballast last?

12 to 15 years
According to the Certified Ballast Manufacturers Association, the average magnetic ballast lasts about 75,000 hours, or 12 to 15 years with normal use. The optimum economic life of a fluorescent lighting system with magnetic ballasts is usually about 15 years.

How long does a ballast last?

How long should a ballast last?

Is it the ballast or the bulb?

The ballast provides enough voltage to start the fluorescent bulbs, and once they are started, it quickly lowers the current to produce just enough electricity to produce a steady light source. Without the ballast, a fluorescent bulb would attach directly to 120-volt current and quickly burn out the bulb.

Why do my fluorescent lights not turn on sometimes?

If a fluorescent tube neither lights nor flickers when switched on, first check to see that the fixture is plugged in and that no fuse has blown or circuit breaker has tripped. If this does not help, try wiggling the tube gently in its sockets by rocking it back and forth and from side to side.