How do I login to my Smart RG router?

How do I login to my Smart RG router?

Type 192.168. 1.1 (the most common IP for SmartRG routers) in the address bar of your web browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your SmartRG router is admin.

What is NCF DSL password?

Your DSL password This is the password assigned that allows your DSL modem to sign onto the internet via Bell’s wired network. It typically consists of 12 letters and numbers starting with “ncf”. When you picked up your modem your DSL password will have been supplied to you along with instructions on a sheet of paper.

How do change my WiFi password?

How to change your Router’s Wi-Fi password

  1. Open your browser to the configuration page of your router:
  2. Enter your router’s username and password details:
  3. Open the Wireless section:
  4. Change the password:
  5. Set your security type:
  6. Save your settings:

What is my teksavvy username?

When prompted login using the username of admin and the password on the bottom of the modem.

How do I setup my Smart RG modem?

SmartRG 808AC

  1. When prompted to login with a username and password, use the username and password located on the bottom of the modem.
  2. Click Wireless.
  3. Click Radio.
  4. Set the Wireless Interface drop down menu to 2.4 Ghz.
  5. Click Primary Network.
  6. Enter your desired wireless network name into the Network Name (SSID) field.

How do I change my teksavvy WIFI password?

Type http://192.168.1.1 into the address bar and then press Enter on your keyboard. If you haven’t changed the admin username and password of your router from their default values, enter admin into both the username and password fields. If you have changed these values, enter your custom administrative credentials.