How do you put wheels on a mop bucket?
How do you put wheels on a mop bucket?
Steps: Insert spacers into each hole on the bottom of the bucket. After the spacers are installed, insert each caster into the spacer by hand until secure. Using a rubber mallet, tap each spacer so it fits securely against the bucket.
How do you get hair out of mop bucket wheels?
If your casters are removable, then put them in a bowl or a bucket of warm soapy water and let them soak for a while. Stir them up and remove them. This helps remove any additional dirt, grime, and hair still caught in the wheels. If you can’t remove the casters, a large, shallow tray can serve the same purpose.
What are the parts on a mop bucket?
Mop Bucket
| Part # | Part Name | Description |
|---|---|---|
| 1 | Bucket | Holds water and cleaning solution, collects water drained from mop |
| 2 (not pictured) | Bucket Handle | Allows user to pick up bucket (e.g. move up/down stairs, into car) |
| 3 | Wheel Bolt | Secures wheel inside wheel mount |
| 4 | Wheel Nut | Secures wheel inside wheel mount |
How do you take apart a caster wheel?
Follow these simple instructions:
- Turn your office or desk chair over so you have access to the wheels.
- Grab on to the chair leg with one hand and grasp the caster wheel with your other hand.
- ​Use force to pull out the wheel with your hand.
- Use the screwdriver handle to slowly pry the caster out.
What are yellow buckets used for?
A good starting point for commercial colour coded cleaning is the mop and bucket: use a red-coloured mop and bucket to clean the toilets; and a yellow-coloured mop and bucket to clean the kitchen.
How do you lubricate plastic casters?
Lubricate Spray the inside of each wheel with a spray lubricant. Just a little should do fine. Wipe off any excess lubricant as it can attract and hold dirt. Many lubricants attract dirt, but some do not.