How do you reset a Verizon MiFi 5510L?

How do you reset a Verizon MiFi 5510L?

restores the default settings viewable on the external LED of the device.

  1. Ensure the device is powered on.
  2. Remove the battery cover.
  3. Utilizing a paperclip (or similar tool), press and hold the reset button until “MiFi Resetting” appears on the display then release.
  4. Replace the battery cover.

How do I remove SIM card from Verizon Jetpack 5510L?

Lift the SIM card hinge. With the gold contacts facing down and the notch located in the upper-left, insert the SIM card as shown. If the SIM does not slide out easily, continue to hold the SIM hinge and push the SIM card from the top to dislodge.

How do I change settings on my Verizon Jetpack?

To view or change network security settings (e.g., Wi-Fi password, number of connected devices) for your Jetpack, see this info.

  1. Access the Admin Web Interface .
  2. From the left menu, click. Jetpack Settings.
  3. From the Wi-Fi tab, configure Wi-Fi settings as desired:
  4. Click.

How do I turn on my MiFi 5510L?

Verizon Jetpack 4G LTE Mobile Hotspot MiFi 5510L – Activate / Set Up Device

  1. Insert the SIM card .
  2. Insert the battery.
  3. Press and hold the.
  4. From the “Welcome to the Jetpack MiFi® 5510L” screen, select.
  5. Establish a Wi-Fi network connection between the Jetpack and the device.
  6. Launch a web browser.

Why is my Verizon MiFi not working?

Master reset your MiFi if you are still experiencing connection issues. Complete the master reset by pressing the master reset button on the bottom of the MiFi with a small pointy object, such as an unfolded paper clip, until the MiFi blinks green twice, once long and once short.

How do I factory reset my jetpack?

Alternatively, a restore can also be done as follows:

  1. Access the Admin Web Interface .
  2. From the left menu, click. Jetpack Settings. .
  3. From the Jetpack tab, click. Backup & Restore. .
  4. From the Restore to Factory Defaults section, click. Restore Factory Defaults. .
  5. From the pop-up, click. Restore Factory Defaults. to confirm.

Where is the SIM card located on jetpack?

Open the SIM card cover (located on the top edge). Using the provided slot, carefully lift then rotate the cover down. With the gold contacts facing down and the notch located in the lower-right, insert the SIM card as shown.

Do you need a SIM card for jetpack?

Its basic function is to generate a wifi network so that you can access the internet. It needs an active verizon data SIM card.

How can I make my Verizon Jetpack faster?

At weBoost, we offer a few options for you to make a Verizon Jetpack faster. You can add: an external antenna, which connects to the external antenna port on your Jetpack if it has one (check your specific model to be sure), a mobile signal booster system, which boosts the wireless signal for mobile devices, or.

How do I change my Verizon hotspot to 2.4 GHz?

Use the navigation arrows to scroll through options and the checkmark to select.

  1. Access the Admin Web Interface .
  2. From the left menu, navigate: Jetpack Settings. Wi-Fi.
  3. From the Wi-Fi tab, click. 2.4 GHz Wi-Fi. .
  4. Click the. blue arrow.
  5. Adjust the Wi-Fi channel as desired. Auto (default setting) is recommended.
  6. Click. Save.

Why wont my MiFi turn on?

If your MiFi won’t turn on, make sure you have fully charged it using the wall charger provided with your device. Once your device has been fully charged, press and hold the Power button until the display lights up.

How do I activate my jetpack?

Follow these step-by-step instructions to activate your Jetpack.

  1. Insert the SIM card .
  2. Insert the battery. Prior to using the device, ensure the battery is fully charged.
  3. Press and hold the. Power button.
  4. Establish a Wi-Fi network connection between the Jetpack and the device.
  5. Launch a web browser.