How many amps should my alternator be putting out?
How many amps should my alternator be putting out?
Most late model alternators produce 120 to 155 amps or more. Current output increases with engine speed, from around 20 to 50 amps at idle up to the unit’s maximum output at 2,500 RPM or higher (refer to a service manual for the exact charging output specifications for your vehicle).
Is 14.8 volts too high for alternator?
14.8 would start to be a worry (there might be liquid or corrosion on the battery) and 15 volts would be a real concern, but 14.6 is fine. Less than 14.3 would be a “weak” alternator or regulator. Much less than 14.2 at a fast idle is bad wiring, bad alternator or regulator, or a bad connection or fuse link.
How many amps is my stock alternator?
Most factory alternators are rated at 65 to 100 amps and are capable of handling your vehicle’s basic necessities, such as headlights, gauges, fuel pumps, A/C, etc. These alternators also typically come with a 10 to 15 percent reserve to handle additional accessories.
Is it better to have a higher amp alternator?
If you’re worried about a high amp alternator providing too much power to your ECU, or any other component in your electrical system, you don’t need to. The amperage rating on an alternator is basically just the amount of current that the unit is capable of putting out, not the amount it always puts out.
What current does a car alternator produce?
The power that can be produced by an alternator is determined by the alternator rating. The output of the alternator ranges from 40 Amp up to 120 Amp. For high-amp alternator, it can generate up to 300 Amp. Commercialized alternator is usually 12 V.
What is normal alternator output voltage?
between 13.9 and 14.8 volts
A good alternator should maintain battery voltage between 13.9 and 14.8 volts (14.2 is optimum). Even worst-case, with all accessories turned on, there should be at least 13 volts at the battery.
At what speed does the alternator charge the battery?
Alternator may not generate sufficient charging voltage until alternator speed is greater than about 2000 RPM. Typically, alternators have their full output rated at 6000 RPM but can continue to spin up to 12,000 RPM or more without any additional increase in output.