How often should you replace headset bearings?
How often should you replace headset bearings?
If you ride in good dry conditions, headset bearings can last 2-7 years, depending on the level of service. But if you ride in wet or dusty conditions, they can only last you 2-3 months. So, two factors are critical in determining the headset bearings’ lifespan: cycling conditions and headset maintenance.
How do I measure my headset bearing size?
Measure the widest portion of the inside of the bearing while keeping the tool square to the flat edge of the inner bearing race. This is the internal diameter. Now measure the widest portion of the outside of the bearing while keeping the tool square to the flat edge of the outer bearing race.
Should you grease headset bearings?
The headset bearings are one of the most common points to grease and it is advisable that in addition to greasing the bearings, you also grease the fork crown and in the frame where they sit, as well as the rest of the steering parts, but you must be careful not to grease the steerer tube at the point the stem is …
How often should you grease headset bearings?
Every 30 years, whether they need it or not. It should be noted headset bearings — at least the old “threaded” style — can come completely apart (all the balls fall out) without severely impairing the handling of the bike (though certainly this condition would drive a “bike nut” crazy).
How often should you grease bicycle wheel bearings?
Most people don’t realize this, but your bike needs maintenance. Your axle bearings needs to be cleaned and repacked with grease every 500 miles (100 on a mountain bike). This instructable shows how to repack your axle bearings and install a new freewheel body (if you need one).
How do you grease bike fork bearings?
Spin the bearing to get the grease around the balls. Wipe the seal clean and then gently snap it back into place with thumb pressure. Leave some excess grease, so that the seal forces it into the bearing as it snaps into place.