Is there a 17mm socket?
Is there a 17mm socket?
1/2-in Drive 17mm Metric Shallow Impact Socket is engineered and constructed to endure high torque application with impact wrenches. This impact socket is specially designed to engage with the flats of fasteners to prevent rounding so it’s time to turn up the torque and turn tough jobs into easy ones.
What is the T-handle?
Rather, the bottom of the handle is tapped, meaning it has a threaded hole. Tapped T-handles are used in applications where the machine or workpiece has a bolt or other threaded fastener. You can twist a tapped T-handle onto a threaded fastener.
How are socket handles sized?
Socket sizes are measured based on imperial system inches and fractions. Some of the commonly used SAE sizes are 3/8 in., 5/8 in., and 11/16 in. sockets. Metric sockets: Ideal for working on imported vehicles, metric sockets’ sizes are measured in millimeters.
What is a sliding T-handle?
Sliding T Handles are used for driving of manually operated sockets. It has a large leverage handle which alloys application of force comfortably. Further final tightening can be done with both hands. The sliding T-Head is provided with a ball to arrest movement of handle at any desired position.
What is equivalent to 17mm socket?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 16mm | 0.63 | |
| 21/32″ | 0.656 | |
| 17mm | 0.669 | |
| 11/16″ | 0.688 |
What size is 15mm in metric?
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 13mm | Little over 1/2 Inch | 0.51181 Inches |
| 14mm | 9/16 Inch | 0.55118 Inches |
| 15mm | Just short of 5/8 Inch | 0.59055 Inches |
| 16mm | 5/8 Inch | 0.62992 Inches |
What is a socket T bar used for?
A breaker bar (also known as a power bar) is a long non-ratcheting bar that is used with socket wrench-style sockets. They are used to break loose very tight fasteners because their additional length allows the same amount of force to generate significantly more torque than a standard length socket wrench.
What are sliding T bars used for?
Bahco SBS64 Sliding T-Bar made from high performance alloy steel with a matt finish. Allows you to use two hands to turn the socket when positioned centrally. Or the bar can be slid all the way over to one side for applying greater leverage and torque to the socket.
What is a T handle tap wrench?
T HANDLE TAP WRENCH – STANDARD TYPE. • T handle tap wrenches , ideal for holding taps, reamers, screw extractors and other such small hand turned tools. • T-handle tap wrench allows you to turn taps to help make screw threads.
Is there an 18mm socket?
uxcell 1/2″ Drive by 18mm Deep Impact Socket, Heat-Treated CR-V Steel 8″ Length, 6-Point Metric Sizes 2 Pcs.
What is speed handle?
A speed handle which includes a ratchet drive on the working end. A conventional socket can be attached to the mounting end of the ratchet drive. The speed handle is especially useful in areas where there is very little room for operating a conventional wrench or conventional ratchet wrench.
Are there different socket sizes for each end of a wrench?
These wrenches have a different socket size at each end. For technical drawings and 3-D models, click on a part number. Lg. Lg. Turn nuts on bolts and threaded rod, which can pass through the short end of the wrench.
How do you use a T handle on a wrench?
Turn nuts on bolts and threaded rod, which can pass through the short end of the wrench. For additional leverage, slip a bar through the short end to create a T- handle. Wrenches with a 12-point opening are easier to position on hex fasteners than wrenches with a 6-point opening but make less contact. Lg.
How does a ratchet wrench work?
This wrench has a ratchet mechanism that allows you to turn fasteners in tight spaces without removing and repositioning the tool. Lg. These wrenches have one pivoting socket end and one open end.