What are the proper procedures to lockout and tagout a machine?

What are the proper procedures to lockout and tagout a machine?

Lockout/Tagout Procedures—Keep it Simple, Keep it Safe

  • Prepare for the shutdown.
  • Notify affected employees.
  • Shut down the equipment.
  • Isolate energy sources.
  • Apply LOTO devices to energy sources.
  • Release/control all stored energy.
  • Verify the lockout.
  • Maintain the lockout.

What is the correct order for proper lockout procedures?

Prepare a written sequence in checklist form for equipment access, lockout/tagout, clearance, release and start-up, where lockout is complex. Your workers should check with a supervisor or other knowledgeable person if in doubt about which energy sources may need to be controlled.

What are the basic steps of locking and tagging out a system?

What are the basic steps of locking and tagging out a system?

  • Prepare for Shutdown.
  • Notify all Affected Personnel.
  • Equipment Shutdown.
  • Isolation of System (De-energization)

What do LOTO procedures outline?

LOTO will follow the specific instructions for each piece of equipment/machinery to identify, disconnect, isolate, lock out and verify the lock out of the appropriate energy sources.

What are the basic components of a Loto procedure?

What Workers Need To Know about LOTO:

  • Aspects of the employer’s energy control program.
  • Elements of the energy control procedure relevant to the employee’s duties or assignment.
  • The various requirements of OSHA standards related to lockout/tagout.

What 3 words must be on a lockout tagout?

OSHA requires three basic elements in a lock-out tag-out program. These are training, written procedures, and inspections. Training is required for two types of people; “authorized employees” and “affected employees.” Authorized employees are people who do the maintenance or servicing work.

What is OSHA lockout/tagout procedure?

The OSHA standard for The Control of Hazardous Energy (Lockout/Tagout), Title 29 Code of Federal Regulations (CFR) Part 1910.147, addresses the practices and procedures necessary to disable machinery or equipment, thereby preventing the release of hazardous energy while employees perform servicing and maintenance …

What are OSHA 6 steps for Lockout Tagout?

Preparation – Lockout/Tagout. The first step of the locking and tagging out equipment or machine etc.

  • Shut Down – Lockout/Tagout. With the planning complete,the actual or exact process of powering down and locking out machines starts.
  • Isolation – Lockout/Tagout.
  • Lockout/Tagout.
  • Stored Energy Check – Lockout/Tagout.

    • When to lockout a machine?

    A steam valve turns on while workers are repairing piping,leading to second-degree burns and a trip to the hospital.

  • Workers who repair a broken conveyor belt are caught in the device when it is fixed.
  • Workers repairing faulty wiring are shocked when the electricity source fails to be disabled before starting their repairs.

    • What should be included in a lockout procedure?

    What piece of equipment the procedure is for

  • The name of the company
  • The purpose of the procedures
  • Compliance requirements for employees
  • Enforcement measures in cases of non-compliance

    • How to write lockout tagout procedure and Loto program?

    – Documented energy control procedures, including the scope, purpose, authorizations, rules, and techniques used to control energy sources and how compliance will be enforced – Employee training program – Periodic Inspection and performance review of the use of the procedures