What motor is in a 1989 Chevy 1500?
What motor is in a 1989 Chevy 1500?
What Engine Is In A 1989 Chevy Silverado 1500? The 1989 Chevrolet C/K 1500 had a four-liter engine.It produced 160 horsepower and 235 ft lbs of torque. The engine was a three-liter V6. There were four strokes in the bore.
How much horsepower does a 1989 Chevy 1500 have?
Motors and Transmission All 1989 Chevy 1500 trims come with a standard 4.3-liter, V6 engine. However, the diesel engine, which is a 6.2-liter, V8 motor, is an option available on all trims. The 4.3-liter is a 160-horsepower motor that produces 235 ft-lb of torque.
How much horsepower does a 1989 Chevy Silverado 350 have?
How Much Horsepower Does A 1989 Chevy Silverado 350 Have? Suburban options were available in 1989 from two 350 packages. 190 horsepower (hp) was produced by one vehicle, while 210 horsepower (hp) was produced by another. The 350 in the HD van produced 185 HP, whereas it produced 240 HP in the Corvette.
What transmission came in a 1989 Chevy 1500?
The ’89 should have a 700r4/4L60 4 spd (some came with the turbo 350 3 spd) and the ’94 should have a 4L60e with the stand alone TCU (tranny control unit) on the inner fender to control it. You will need to grab the linkages and cable brackets off of the ’89.
What transmission is in a 1989 GMC 1500?
1989 GMC Sierra C/K 1500 The 4.3-liter V-6 is rated at 160 horsepower and 235 foot-pounds of torque. The 6.2-liter V-8 produces a maximum of 126 horsepower and 240 foot-pounds of torque. The only available transmission is a four-speed automatic with overdrive.
What generation is a 1989 Chevy 350?
The 1989 Chevy 350 was a part of the engine family’s second generation, which was produced from 1962 until 1998.
Are OBS trucks reliable?
For the 1996 model year, GM switched to a central point injection that gave each engine an additional 40 horsepower. Overall these engines are remembered for their reliability and delivered enough power to make the OBS trucks fun to drive.
What is the difference between a 700R4 and 4L60?
You can’t tell the difference between a 700R4 and a 4L60E by the oil pan as they are nearly the same. If the transmission has a large 18-pin electronic connector above the passenger side pan rail, it’s a 4L60E, as seen here. If it has a cable connection near the cooler lines on the passenger’s side, that’s a 700R4.
What years did Chevy use the 700R4 transmission?
The General Motors 700R4 transmission was manufactured by Chevrolet in 1981 to run with 1982 model year vehicles. It is a four-speed automatic transmission with overdrive and was introduced as a way to make V8-powered cars and trucks more efficient.
What kind of engine is in a 1989 GMC Sierra?
Best of Both Worlds: Show Truck Looks, Race-Bred Performance
| SPECIFICATIONS | ||
|---|---|---|
| Owner/hometown | : | Brian Rush/Thousand Oaks, California |
| Engine | : | 5.0L GM small-block V-8; Comp Cams camshaft; |
| MSD Ignition; Gibson headers | ||
| Transmission | : | B&M Traveler 700-R4 Overdrive |
How much horsepower does a 1989 GMC Sierra have?
1989 GMC Sierra C/K 1500 Power is generated from a V-6 or diesel V-8 engine. The 4.3-liter V-6 is rated at 160 horsepower and 235 foot-pounds of torque. The 6.2-liter V-8 produces a maximum of 126 horsepower and 240 foot-pounds of torque. The only available transmission is a four-speed automatic with overdrive.