What should my salt chlorinator output be set at?
What should my salt chlorinator output be set at?
To make your salt water chlorinator last, you’ll need to perform regular maintenance on it just as you do every other part of your pool. Try to maintain a consistent salt level of between 2,700 parts per million (ppm) and 3,400 ppm, with 3,200 ppm being ideal.
What happens when a salt chlorinator stops working?
Water flow The saltwater chlorinator needs a sufficient flow of water for effective operation. A dirty skimmer basket, clogged or dirty filter, and a clogged pump strainer, can cause insufficient water flow for the chlorinator to produce less chlorine.
What should I set my chlorinator to?
Your salt levels will vary depending on the type of chlorinator you have. If you’re using the Water TechniX Salt water chlorinator then you should try to aim for a salt level of around 3,000 to 4,000 ppm.
How long do salt water chlorinators last?
3–7 years
A well-maintained salt chlorine generator will last 3–7 years. Replacing the salt cell costs $700–$1100. Replacing the control board costs $500–$900. You can extend the lifespans by maintaining a consistent salt level, cleaning the cell only when needed, and using the reverse polarity function.
Why is my salt water pool not producing chlorine?
Salinity. Chlorine generators need salt to produce chlorine and can’t do so if the amount of salt in the water is too low. The desired salinity level in a saltwater pool is between 2,500 and 3,500 ppm. Get a salt-testing kit from a pool supplier and check to make sure that the levels are within this range.
How long does a salt chlorinator last?
A well-maintained salt chlorine generator will last 3–7 years. Replacing the salt cell costs $700–$1100. Replacing the control board costs $500–$900. You can extend the lifespans by maintaining a consistent salt level, cleaning the cell only when needed, and using the reverse polarity function.
How do you reset a saltwater pool chlorinator?
To reset, move the switch to ‘Off’ and then back to ‘Auto’. Wait for the relay to click (5 to 10 seconds). When the instant salt level is stable (and the negative sign still present), slide switch to ‘Super Chlorinate’ and back to ‘Auto’. It takes about 30 seconds for the unit to settle back on the default reading.